Class 3 frames discarded
IN san health report I see C3D parameter = 78 on port details What indicate this counter?
View ArticleMSCOMCTL.OCX outdated error when starting SAN Health
I am receiving the attached error when starting SAN Health. Has anyone seen this before? I have tried re-installing SAN Health, updating VisualBasic, re-registering the file and using a mscomctl.ocx...
View ArticleSAN Health Vs Cisco MDS 9124e
Our SAN is a hodgepodge of Brocade, McDATA and Cisco 9124e switches. When I use the SAN Health check it goes through all the motions and appears to be gathering data from the Cisco 9124e switches. But...
View ArticleSAN Health sends FOS commands to McData EOS switches
We have a mix of older McData switches (all of which are in the support matrix) plus newer Brocades. However, SAN Health sends FOS commands to all switches, including the McDatas. Any help is...
View ArticleSan Health - Hang Mems
Hello, Do you know what Hang Mems that appears inside the report generated by SanHealth means ?
View ArticleIssues with San Health on a Cisco san
I have a 46 switch Cisco San. I am having issues getting San Health 3.2.2 to connect to all switches. It fails at the same command "show cfs peers" the switches are running a mix of 4.1.1b and 4.2.1b...
View ArticleSanhealth and logical switch/virtual fabric
Is there a way to configure sanhealth to scan all logical switches, and not only base switch? Our configuration is composed of DCX directors, in which we've defined logical switches and then virtual...
View ArticleSan Health and different FID
Hi I'm trying to run SAN Health and I'm having problems with FID, because one of my switch has FID=15 (logical switch configured), and San Health is using FID 128. I tryed to run "switchshow" using...
View ArticleSAN Health tool fails to connect to CMCNE/BNA Server
I have a bunch of fabrics in production and would like to connect the SAN Health tool to my CMCNE/BNA Server rather than managing these separately. I checked through the documentation
View Articlehanging zone - cleanup
when the SAn health utility is run there are highlighted zones / zone members in blue which can be seen in the EXCEL. Are these hanging zones? as in not in effective but present in defined? if thats...
View ArticleDuplicate WWN's being reported on SAN Health Check v3.2
Has anyone ran into this issue: After running a SAN Health report The SAN Port page shows multiple duplicate WWN's but when you do a switchshow the correct WWN are presented
View Articlehow to manually upload SANhealth data
Hello is there a possibility how to MANUALLY upload SANhealth data for analysis and get results back? I've received a BSH file from customer and need the analysis. Best regards Z
View ArticleHow to do Periodic Maintenance for Brocade SAN Switch B64/B80/384B/768B
I am a new Network Engineer. How to do Periodic Maintenance for Brocade 2005-B64 2498-B80 2499-384B 2499-768B SAN Switch? What items to check and what commands should be used. Is there formal...
View ArticleHanging Zones/Alias/Config
Hello: I just ran SAN Health check today and in the "Zoming Metrics" section it states that I have. 21 Hanging Aliases 21 Hanging Zones 1 Hanging Config According to the explanation it means that I...
View Articledoes not belong to a fabric in the tree view
HI Guys Just on-board with MY Brocade & Forum. Thanks to all who have supplied solutions and assistance during my 'lurking' :-) I have however got an issue that I cennot seem to find a solution...
View ArticleSAN Health Check performance capture does not progress
Has anyone experienced issues with SAN Health (v3.2.2) not collecting Performance Capture from their Brocade DCX's? There was a time that this capture used to work. However, suddenly this stopped...
View ArticleSAN Health Utility 3.0.0 & 3.0.1
When running the utility I am having problems with collecting data from my Brocade 12000 directors. I keep getting a time out when it is trying to get the ConfigShow output. I have no problems with...
View ArticleSAN Health Check with virtual fabrics?
I just tried to run a SAN Health Check but it failed to get most data because I'm using virtual fabrics, is there a way to make it aware of the virtual fabrics? Four switches, each with four virtual...
View ArticleWhat does "Hang Mems" mean?
Thumbing through my Zoning Details after running Brocade SAN Health, I notice some of my Zone Names are highlighted along with respective Zone Members, and they seem to corespond to Aliases Statistics,...
View Article