Virtual switch IP assignment
I have added IP addresses to my virtual switches, but the problem is that when I try to telnet or use SAN Health to any of new IPs I am still connected to FID 128 What is the proper way of...
View ArticleSAN Health Check on Brocade 3900 Switch
Hello, IS SAN Health not supported on Brocade 3900 .. I am get following message:Probing failed on F-port which is possibly a privated device which is not supported in this port type. Pls let me...
View ArticleSAN health brings: possible unidentified switch found in fabric
hi, i have 2 fabrics: 1 fabric: 2x SAN24B-4 switches with FOS: 6.2.0e and 2x SAN40B-4 switches with FOS: 6.3.1b 2
View ArticleCan you run Brocade SAN health check tool against Cisco switches with telnet...
Can you run Brocade SAN health check tool against Cisco switches with telnet disabled?
View Articlecustom report
Does someone already customize excel report based on SAN-Health result documents. We are looking for a way to adapt the san-health document to our needs. We need to merge information from san-health...
View ArticleISL CRC Errors_ what is an acceptable threshold
One of the ISL cables we have laid seems to displaying CRC errors. We have since relaid it and the errors have reduced but not gone away. I've sent some data through this link and pasted the ports in...
View ArticleSAN Health + EMC Connectrix Manager + 6140 switches
Hi All, I'm trying to run SAN Health against a very old environment that I have. We're running EMC Connectrix Manager version 9.7.4 with a whole whack of 6140 switches being managed. The 6140's are...
View ArticleSend SAN Health data file (.bsh) via HTTPS
Dear eveybody, in my company we have SAN Health Version 3.2.2 and there's the possibility to send the encrypted SAN Health data file (.bsh) to the report generation queue via HTTPS. I click on the...
View ArticleFan Out Ratios what does it means
I received Fan Out ratios error. it has two parameters they are red color. 119:1 and 156.5:1 what does it means ???
View ArticleMeaning for Loopback->Port
Hello, last week when I get connected via telnet to one of our switches (silkworm4900) and when I executed a switchshow command, two of the 64 ports look like this: 15 15 id N1 Online Loopback->Port...
View ArticleHelp interpreting MIB variable connUnitStatus
I am using fcmgmt.mib.what does snmp variable connUnitStatus value 5 means. fcmgmt defines connUnitStatus: Overall status of the connectivity unit. The goal of this object is to be the single poll...
View ArticleTelnet Sessions?
I run the SAN Health Report using the admin login for our switches and it seems to be logging in twice resulting in no ability for another admin to login. Is this behavious normal or is there a way to...
View Articlehanging zone - cleanup
when the SAn health utility is run there are highlighted zones / zone members in blue which can be seen in the EXCEL. Are these hanging zones? as in not in effective but present in defined? if thats...
View ArticleHelp need to check the used & available Brocade switch ports in each fabric
Hi. I'm newbie here. I'm support an environment that has 100+ switches in several fabrics. I'm thinking to run audit over the switch ports which are used & available. Instead of login to each...
View ArticleHanging Zones/Alias/Config
Hello: I just ran SAN Health check today and in the "Zoming Metrics" section it states that I have. 21 Hanging Aliases 21 Hanging Zones 1 Hanging Config According to the explanation it means that I...
View ArticleHanging aliases and zones
I am using latest san health client version 321. Several hanging aliases and zones are marked in zoning detail section. The ports in question are all online but not shown in the port map of the report....
View Article5100 running FOS 6.3.1a wont add to San Health Tree View
Hello, I have just bought a pair of 5100 switches 24 ports are licensed and have 8gb gbics installed these have come with version 6.3.1a FOS installed When I try to add them to my San Health...
View ArticleSan Health Reports
I can generate the San Health reports just fine, and they are great. I just am not sure what every item means and what benchline to compare it to. E.g. what is Avg perf and Max perf in the port map...
View ArticleDuplicate WWN's being reported on SAN Health Check v3.2
Has anyone ran into this issue: After running a SAN Health report The SAN Port page shows multiple duplicate WWN's but when you do a switchshow the correct WWN are presented
View Article