Where are the SAN Health file downloads located on the mybrocade.com site? Thank you!
↧
San Health downloads
↧
problem downloading the latest SAN Health
Hello, I have a problem downloading the latest SAN Health diagnostics. I have tried downloading it both from IE 8 and Firefox 8. When you click the Download button, the browser just displays a blank page and it stays like that. We
↧
↧
Bug: utility doesn't recognize vendor ID 38:a9:5F, reports NON-STANDARDS COMPLIANT WWN
pWWN's from Vendor ID 38:a9:5F is reported as non-standard compliant WWN and that is incorrect.
38-A9-5F (hex) Actifio Inc
38A95F (base 16) Actifio Inc
↧
Sanhealth and logical switch/virtual fabric
Is there a way to configure sanhealth to scan all logical switches, and not only base switch? Our configuration is composed of DCX directors, in which we've defined logical switches and then virtual fabircs.
↧
Zoning transaction aborted
Hello, What does it means: "Zoning transaction aborted - User command" "Process: ZONE-1027" This message is repeated each 8 hours on boths fabrics (Silkworm4100 v4.4.0c) NOTE: This content was migrated by Brocade from the former Brocade Connect
↧
↧
portshow
Interrupts: 42 Link_failure: 8
↧
Virtual switch IP assignment
I have added IP addresses to my virtual switches, but the problem is that when I try to telnet or use SAN Health to any of new IPs I am still connected to FID 128 What is the proper way of configuring the switch/SAN Health to allow
↧
SAN Health Report info
Does the SAN Health Report show the mac address of the Brocade switch? If not is there a way to find out what the mac address is, we have a 200e..
↧
ISL CRC Errors_ what is an acceptable threshold
One of the ISL cables we have laid seems to displaying CRC errors. We have since relaid it and the errors have reduced but not gone away. I've sent some data through this link and pasted the ports in question below (ouput is from porterrshow).
↧
↧
SAN Health + EMC Connectrix Manager + 6140 switches
Hi All, I'm trying to run SAN Health against a very old environment that I have. We're running EMC Connectrix Manager version 9.7.4 with a whole whack of 6140 switches being managed. The 6140's are on their own private, internal
↧
What does "Hang Mems" mean?
Thumbing through my Zoning Details after running Brocade SAN Health, I notice some of my Zone Names are highlighted along with respective Zone Members, and they seem to corespond to Aliases Statistics, Zone Statics, and Config Statistics, and they all
↧
Send SAN Health data file (.bsh) via HTTPS
Dear eveybody, in my company we have SAN Health Version 3.2.2 and there's the possibility to send the encrypted SAN Health data file (.bsh) to the report generation queue via HTTPS. I click on the options menu to configure the HTTPS connection option
↧
Zoning Details doesn't show aliases in zones
Has anybody else seen this? In the Zoning Details tab for a Fabric, the Defined Zones show the WWNs as opposed to the aliases that are defined in the zones.
↧
↧
Audit set problem from command line
I have run the San Health the 2.2.3 program successfully, I saved the audit set and then tried to run it from the command line. Two thingsL:- 1)none of the switches would log on successfully although I had just run a successful capture from the GUI
↧
San Health - Hang Mems
Hello, Do you know what Hang Mems that appears inside the report generated by SanHealth means ?
↧
SAN Health - Visio - Group Server?
Hi, The visio, generated with sanhealth, show the same server with the two HBA like this: Is it possible to group in one server automatically? Like this: Thank you for your answers.
↧
Meaning for Loopback->Port
Hello, last week when I get connected via telnet to one of our switches (silkworm4900) and when I executed a switchshow command, two of the 64 ports look like this: 15 15 id N1 Online Loopback->Port 15 40 40 id N1 Online Loopback->Port 40 When I
↧
↧
Telnet Sessions?
I run the SAN Health Report using the admin login for our switches and it seems to be logging in twice resulting in no ability for another admin to login. Is this behavious normal or is there a way to limit it to only using 1 telnet session? Thanks
↧
Can I use SAN Health on a McData FC switch?
Can I use SAN Health on a McData FC switch? I just started a new job and they have some older Mcdata switches and I want to get the same info from them that I can get for the Silkworms...
↧
frame count & perf data - Enc Out?????
I ran a report that shows an attached server with blue highlighted Enc Out number of 2.2g. What is that? It's the only questionable item in the report... Thank you in advance!
↧